Costa-Rica Wetting agent SK1

Product Overview

Wetting agent SK1 is an alkyl polyoxyethylene ether.

Typical properties

Active content: 50%

Ionicity: Nonionic

HLB value: 19

CMC value: 4.5

Surface tension: 45

Product Characteristics

1. Low VOC, low odor and APEO-free, can improve the freeze-thaw stability of coatings; used for pigment dispersion, for red and yellow pigments, can significantly improve the fluidity of the color paste.

2. APEO-free, providing a larger area of absorption, used as a post-stabilizing emulsifier for emulsions to improve mechanical, freeze-thaw and chemical stability; easily soluble in water, low foaming.

Usage

Recommended dosage is 0.1-0.5% ( relative to paint ) 0.1-5% ( relative to color paste )

It can be used as emulsifier in emulsion polymerization to improve the electrolyte stability and freeze-thaw stability of emulsion.

It can be added into emulsion before, during or after polymerization.

Can be used as emulsifier of asphalt emulsion

Packing

25 or 200 kg/drum.

Storage

The storage temperature should not be lower than 0℃, so pay attention to the place of placement.

If local condensation occurs due to low ambient temperature, it can be warmed up to room temperature and stirred well before use.

Transportation

Non-dangerous goods, non-flammable and non-explosive.