Product Description

Brake disc waterborne anticorrosion paint, is a baking paint system, tailor-made for the brake disc coating of long-lasting anticorrosion, is a higher degree of appreciation of the water paint products, salt spray resistance of more than 120 hours of industry requirements. Easy construction, green environmental protection, good anti-corrosion performance, can adapt to a variety of harsh environments, adapted to different brake disc metal substrate.

Construction method

1、Surface treatment: safely remove floating ash, floating rust, oil and other impurities on the surface of the brake disk to be coated, so that the surface of the workpiece to be coated is clean and dry.

The surface of the workpiece is clean and dry.

2、Construction method: spraying or electrostatic spraying:

3、Before use, stir the paint evenly, add appropriate hardener according to the proportion:

4, the dilution ratio of the original paint with deionized water or tap water, the amount of water is 5% of the original liquid paint, water should be

Follow the principle of a small amount of time to avoid excessive dilution

5、Spraying viscosity: 20-25 seconds (painted -4 cups, 23 ± 2 ℃);.

6、Drying mode: baking 80℃-100℃, 20-30 minutes:

7、Painting thickness: single layer dry film thickness 15~25µm.

Precautions

1, the degree of metal substrate treatment will directly affect the final effect of the coating film and protective performance:

2, the substrate must be painted as soon as possible after treatment:

3. When spraying, it is forbidden to mix with other paints and organic solvents to prevent deterioration:

4、This product is water-based paint, warehouse storage and transportation according to non-dangerous goods:

5, the validity period is one year, such as more than the storage period, after the inspection can still be used.

6、Store in a cool and ventilated place, avoid direct sunlight.