Product Information

This product is a two-liquid coating composed of super weather-resistant fluorine resin, high-quality pigment and metal filler, etc. It can effectively prevent the damage of many kinds of chemical corrosive media. It can effectively prevent the damage of many kinds of chemical corrosive media to the base and has a long service life. It can be applied to the exterior of buildings, metal materials, decorative materials and other anti-metal decorations.

Product characteristics: strong adhesion, high hardness, easy to clean, good color retention. Weather resistance, corrosion resistance, temperature resistance, self-cleaning. Long service life.

Technical index: Scrub resistance: >20000 times.

Water resistance: (240 hours) no abnormality.

Salt spray resistance: (1500h) no abnormality.

Paint consumption: (one pass/theoretical value) 7-10m2/kg (the actual painting area varies according to the base, construction environment and construction method).

(The actual painting area varies according to the substrate, construction environment and construction method).

Drying time: (temperature 25℃/relative humidity 70%)

Surface drying: 1 hour, recoating interval >8 hours.

Drying time: 24 hours

Construction method: spraying

Warranty period: 12 months

Paint proportion: A component: B component = 10:1

Dilution ratio: 5- 15% of the best complementary system Tianzhi special fluorocarbon primer Tianzhi diluent

Surface treatment

The plate grass-roots level sanding; construction surface must be fully dry, no grease, no dust; with high-quality one-piece board putty to fill the uneven surface, after drying with sanding level; with Tianzhi special one-piece board primer closed to enhance adhesion and alkaline resistance.

Attention

Before construction, make sure to mix the A and B double-component strictly according to the proportion, and add appropriate special fluorocarbon thinner according to the construction viscosity, and use it after 30 minutes of aging.

Construction temperature ≥5℃, wall humidity <8%, wall PH <10.

Construction environment relative humidity <75%, should be no frost, no Jia, no rain and so on.

Storage temperature between 0℃-35℃, stored in a cool dry place, avoid direct sunlight.

This product is a two-liquid support type paint, so it should be used up within 4 hours after mixing.