Product Information

Scope of application: Widely used in concrete walls, cement mortar plaster walls and other substrates, suitable for medium and high grade interior decoration and special occasions of interior decoration.

Characteristics: Fresh smell, super environmental protection, safe and harmless to human body; through the addition of nano-materials to make it has a certain bactericidal effect; smooth film, good leveling, strong covering power, good adhesion.

Base material: modified acrylic copolymer.

Technical index: state in the container: no hard lumps, homogeneous state after mixing.

Constructibility: no obstacle for two brushes

Brush resistance: >700 times

Contrast ratio: >0.90

Paint consumption: (once/theoretical value) 7-12m2/kg (the actual painting area may vary according to the condition of the substrate.

Drying time: (temperature 25℃/relative humidity 70%) surface drying: 1 hour solid drying: 24 hours re-coating interval ≥ 4 hours construction method: brush, roller or spraying

Standard package: 20 kg

Warranty period: 12 months

Dilution ratio: add 10%-20% water dilution

Surface Treatment

The old wall chalk and loose part of the shoveling; construction surface must be fully dry, no grease, no dust, no flab; with high-quality water-resistant putty scraping coating two, after drying with fine sandpaper smoothing.

Caveat

Add the specified amount of water into the paint before construction and mix well.

Construction temperature ≥5℃, wall humidity <10%, wall PH <10.

This product and polyester paint shall not be constructed at the same time, otherwise it is easy to be yellowed, and it is recommended to paint after polyester paint has been ventilated and dried for 96 hours.

Storage temperature between 0℃-35℃, stored in a cool and dry place, avoid direct sunlight.

According to the “non-dangerous goods transportation rules”.

Execution standard GB/T9756-2001, GB18582-2001.