Description

This product is a two-liquid coating composed of super weather-resistant fluorine resin, high-quality pigment and filler. It can effectively prevent many kinds of chemical corrosive mediums from damaging the grass-roots level, and has a long service life. It can be used as a durable decorative protective coating for the exterior walls of buildings.

Product features

Strong adhesion, high hardness, easy to clean, good color retention. Weather resistance, corrosion resistance, temperature resistance, self-cleaning, good service life of more than 25 years.

Technical Indexes

Scrub resistance: >20000 times Water resistance: (240 hours) no abnormality.

Salt spray resistance: (1500h) no abnormality

Paint consumption: (one time/theoretical value) 8-10m2/kg (the actual painting area will be different due to different substrate conditions)

Drying time: (temperature 25℃/relative humidity 70%) Surface drying: 1 hour re-coating interval>8 hours Drying time: 24 hours Construction Method: Brushing, Rolling or Spraying.

Standard package: 18 kg (A component)

Warranty period: 12 months

Matching ratio: component A : component B = 10:1

Dilution ratio: 0-10% of the best complementary system Special epoxy primer Special thinner

Surface treatment

The plate grass-roots level sanding; the construction surface must be fully dry, no grease, no dust; with high-quality one-piece board putty to fill the uneven surface, after drying with sanding flat; with special one-piece board primer closed to enhance adhesion and alkaline resistance.

Caution

Before construction, make sure to mix the A and B double-component strictly according to the proportion, and add appropriate special fluorocarbon thinner according to the construction viscosity, and use it after 30 minutes of maturation.

Construction temperature ≥5℃, wall humidity <8%, wall PH <10.

Construction environment relative humidity < 75%, no frost, no fog, no rain.

Storage temperature between 0℃-35℃, stored in a cool and dry place, avoid direct sunlight.

This product is a two-liquid reactive coating, so it should be used up within 4 hours after mixing.