Product Information

Scope of application: Suitable for outdoor concrete and cement mortar new and old wall sealing.

Features: excellent sealing performance, can prevent water-soluble salt, alkali precipitation, excellent permeability and adhesion, improve the strength of the putty layer, with excellent aging resistance, chemical resistance. Effectively fill the bottom surface, so that the top coat is easier to paint and smoother.

Base material: special acrylic resin

Color: D-1l white D-| transparent

Technical index: state in the container: no hard lumps, homogeneous state after mixing.

Constructibility: no difficulty in brushing

Alkali resistance: (48 hours) no abnormality.

Water resistance: (96 hours) no abnormality.

Paint consumption: (one time/theoretical value) 8-10m2/kg (actual painting area may vary depending on the condition of the substrate).

Drying time: (temperature 25℃/relative humidity 70%) surface drying: 1 hour topcoat interval ≥24 hours

Construction method: Brush, roller or spraying.

Standard package: 20 kg

Warranty period: 12 months

Dilution ratio: water is strictly prohibited

Surface Treatment

New concrete walls must be dried for more than 30 days (drying time can be extended in winter) to remove salt crystals.

Shovel out the old paint film which is chalked and peeled off, and remove the floating dust with high-pressure water gun rinsing and other methods.

Use high quality exterior wall putty to fill in the uneven surface of the grass-roots level, after drying, use fine sandpaper to smooth.

Caveat

Add the specified amount of water into the paint before construction and mix well.

Construction temperature ≥5℃, wall humidity <10%, wall PH <10.

This product and polyester paint shall not be constructed at the same time, otherwise it is easy to be yellowed, and it is recommended to paint after polyester paint has been ventilated and dried for 96 hours.

Storage temperature between 0℃-35℃, stored in a cool and dry place, avoid direct sunlight.

According to the “non-dangerous goods transportation rules”.

Execution standard GB/T9756-2001, GB18582-2001.