Product Information

Scope of application: Suitable for outdoor concrete and cement mortar new and old wall sealing.

Product characteristics: excellent sealing performance, can prevent water-soluble salt, alkali precipitation, excellent permeability and adhesion, improve the strength of putty layer, has excellent aging resistance, chemical resistance. Effectively fill the bottom surface, so that the top coat is easier to paint and smoother.

Base material: special acrylic resin

Color: D-1I white D-| transparent

Technical index: state in the container: no hard lumps, homogeneous state after mixing.

Constructibility: no difficulty in brushing

Alkali resistance Resistance: (48 hours) no abnormality.

Water resistance: (96 hours) no abnormality.

Paint consumption: (one time/theoretical value) 8-10m2/kg (the actual painting area may vary depending on the condition of the substrate) Drying time: (Temperature 25℃/relative humidity 70%) Surface drying: 1 hour Topcoat interval ≥ 24 hours

Construction method: brush, roller or spraying

Standard package: 20 kg

Warranty period: 12 months

Dilution ratio: water is strictly prohibited

Surface treatment

New concrete wall must be dried for more than 30 days (winter can extend the drying time), remove salt crystals.

Shovel out the old paint film of chalking and peeling off, and remove the floating dust with high-pressure water gun rinsing and other methods.

Use high quality exterior wall putty to fill in the uneven surface of the grass-roots level, after drying, use fine sandpaper to smooth.

Precautions

Mix the product well before construction.

Construction temperature ≥5℃, wall humidity <10%, wall PH <10.

Construction environment should be no frost, no fog, no rain construction.

Storage temperature between 0℃-35℃, stored in a cool and dry place, avoid direct sunlight.

According to the “non-dangerous goods transportation rules”.

Refer to the executive standard GB/T9755-2001.