Product Information

Scope of application: Indoor wall, ceiling, concrete, gypsum board, brick structure, asbestos board surface coating, suitable for luxury interior decoration projects.

Characteristics: non-toxic and environmentally friendly, safe and harmless to human body; good workability, good leveling; excellent scrub resistance; smooth film; good covering power, strong adhesion, high coating rate.

Base material: acrylic copolymer.

Technical index: state in the container: no hard lumps, homogeneous state after mixing.

Alkali resistance: (48 hours) no abnormality.

Scrub resistance: >1000 times

Contrast ratio: >0.90

Paint consumption: (one time/theoretical value) 10-13m2/kg (The actual painting area may vary according to the condition of the substrate.

Drying time: (temperature 25℃/relative humidity 70%) surface drying: 1 hour solid drying: 24 hours re-coating interval ≥ 4 hours.

Construction method: Brush, roller or spraying.

Standard package: 20 kg

Warranty period: 12 months

Dilution ratio: add 20% - 30% water dilution

Surface treatment

Shovel out the old wall chalking and loose floating grass-roots level; the construction surface must be fully dry, no grease, no dust.

Use high-quality water-resistant putty to batch level the wall, after drying, use fine sandpaper to smooth.

Caveat

Add the specified amount of water into the paint before construction and mix well.

Construction temperature ≥5℃, wall humidity <10%, wall PH <10.

This product and polyester paint shall not be constructed at the same time, otherwise it is easy to be yellowed, and it is recommended to paint after polyester paint has been ventilated and dried for 96 hours. Storage temperature between 0℃-35℃, stored in a cool and dry place, avoid direct sunlight.

According to the “non-dangerous goods transportation rules”.

Execution standard GB/T9756-2001, GB18582-2001.